naxsunshine.blogg.se

2 Download PuTTY on Linux and Installation Guide.

What are Telnet, Rlogin, and SSH in PuTTY?

1.1.1 Download Alternative Binary Files for PuTTY (Windows).1.1 Download PuTTY for Windows Operating System (Released ).Head back to the other directions to continue the setup. Login using the username “root” (all lowercase) and default password (most likely “edison” without quotes, but check the slip of paper that might have come with your pre-flashed Edison). Now you will see a login prompt for the Edison on the console screen.This will give you a “console” window of what is happening on your Edison. Once the screen comes up, press enter a few times to wake things up.Once you’ve made those changes, Click on OPEN at the bottom of your Putty configuration window.Change the COM number to the number you found when you plugged into the Explorer Board. It normally defaults to COM1 and speed of 9600. Open PuTTY, change from SSH to Serial.Note: If your Edison’s port doesn’t appear, make sure its battery is charged and/or the Edison is powered on. If only one shows up while your Edison is plugged in, and none appear when your Edison is unplugged from your computer, then that is your Edison’s port. Unplug the cable from the Explorer Board. If you see multiple entries and are unsure of which is the port you need: Make note of existing ports. On your computer, go to Control Panel\All Control Panel Items\Device Manager\Ports\ and look for USB Serial Port COMXX.

Once you plug in the cable, you need to determine which COM number it’s using.Note: This photo displays two cables plugged into the Edison board, but only one is necessary for connecting to your computer. Connect the board’s UART port with your computer’s USB port using one of the cables listed in the parts list (Dexcom’s charging cable will work too). One is labeled OTG (that’s for flashing) and one is labeled UART (that’s for logging into the Edison from a computer). You’ll see two microB USB ports on your explorer board.